Ricoh AP1400/AP2000 Benutzerhandbuch

Other Printing Problems

109

❒ If the problem cannot be solved, contact your sales or service representative.

It takes too much time to re-
sume printing.

The data is so large or complex that it takes time to pro-
cess it. If the Data In indicator is blinking, the data pro-
cessing is being done. Just wait until it resumes.

Energy Saver mode might be enabled. In Energy Saver 
mode, it takes time for the machine to warm up.

Image is printed in the 
wrong orientation.

Specify the correct orientation under the “PCL Menu” 
with the operation panel. 

Part of the image cannot be 
printed.

A paper size which is smaller than those specified in 
the application is used for printing. Load the correct 
size of paper. If you can't select the paper size specified 
in the application, make use of the zooming features.

Network configurations you 
have made do not become ef-
fective.

Turn the printer's power switch off and on. The config-
uration sheet of the network interface board will be 
printed automatically. Check the configuration of the 
network interface board with this sheet.