Lennox Hearth 4650EN Benutzerhandbuch

Printing 
takes too 
much time.

The printer is set to a 
slow printing mode 
(for example, thick 
stock or transpar-
ency).

It takes more time to print on special 
media. When using regular paper, 
make sure that the media type is set 
properly in the driver.

The printer is set to 
Energy Saver mode.

It takes time for printing to start in 
Energy Saver mode. If you do not want 
to use this mode, disable it. (

SYS 

DEFAULT MENU/ENERGY SAVER

 

menu)

The job is very com-
plex.

Wait. No action needed.

The printer memory is 
insufficient.

Add more memory.

A toner cartridge for a 
different region or an 
unapproved genuine 
toner cartridge is 
installed (

INCOR-

RECT TONER X

 is 

displayed in the mes-
sage window).

Install a correct KONICA MINOLTA 
toner cartridge approved for your spe-
cific printer.

Blank pages 
come out 
during print-
ing.

One or more of the 
toner cartridges are 
defective or empty.

Check the toner cartridges. The image 
will not print if one or more cartridges 
are empty.

The wrong media is 
being used.

Check that the media type set in the 
driver matches the media loaded in the 
printer.