Konica Minolta C250P Benutzerhandbuch

Specifying printer driver settings

C250P

3-56

You can specify to center staple and fold a printed document.

Click the Layout tab.

From the “Center Staple and Fold” drop-down list, select “Center Sta-
ple and Fold”.

To avoid printing on the folded part of the document, select the “Center 
Erase” check box.

2

“Center Staple and Fold” cannot be specified if “Staple” or “Punch” has 
been selected.

“Center Staple and Fold” is available if optional finisher FS-603 or if sad-
dle stitcher SD-503 is installed on optional finisher FS-514 is installed. 
“Center Erase” is available only if finisher FS-603 is installed.

The available center binding and folding settings differ depending on the 
finisher that is installed. When FS-514 is installed, in addition to “Fold & 
Staple” (which folds the documents in half before stapling them), “Center 
Staple” (which binds documents with staples at the center) and “Fold” 
(which folds documents in half) are available. When FS-603 is installed, 
only “Center Staple and Fold” is available.

Holes can be punched into the printed document.

Click the Layout tab.

From the drop-down list, select whether two or three holes are to be 
punched.

2

The hole punch function is available only when optional finisher FS-603 
and punch kit PK-501 are installed or when optional finisher FS-514 and 
punch kit PK-510 are installed.