Sharp DX-C200P Benutzerhandbuch

Bypass Ppr Size:
8 1/2 x 11

6.

Press the [Menu] key.

• The number of pages that can be loaded in the bypass tray differs depending on the paper type.

Make sure paper is not stacked above the paper guides inside the bypass tray.

Specifying custom size paper for the bypass tray

• When you specify a custom size paper and specify the bypass tray as the input tray on the printer

driver, and perform printing with [Bypass Priority] set to [Any Custom S/T] under [Paper Input] on
the control panel, the printer ignores the paper type and size settings made on the control panel.
Printing is performed with the settings made on the printer driver.

• If you set [Bypass Priority] to [Machine Setting] under [Paper Input], paper size settings made on

the printer driver must match those made on the control panel. If they do not match, an error
message appears and printing stops if [Auto Continue] is not set to [On] under [System].

• When loading custom size or special paper, specify the paper size using the control panel or

printer driver.

• You cannot print on custom size paper with an application that does not support the custom size

setting.

• Paper sizes between 90 - 216 mm (3.54 - 8.5 inches) in width and 148 - 356 mm (5.83 - 14

inches) in length can be loaded in the bypass tray.

1.

Press the [Menu] key.

CER408

Loading Paper

81