Savin 1232 Benutzerhandbuch

Troubleshooting

30

Paper size and type are mis-
matched.

Specified paper size and paper 
type are not loaded in the pa-
per feed tray.

Change the settings to contin-
ue the current job, or press 
[Reset]

 to cancel the job.

Parallel I/F board has a prob-
lem.

An error has occurred in the 
parallel interface board.

Contact your sales or service 
representative.

Print overrun.

The image data has been 
thinned out due to image com-
pression.

Increase memory capacity. 
When adding a memory mod-
ule to the machine, contact 
your sales or service represen-
tative.

Reset duplex unit correctly. If 
the error appears again, call 
service representative.

The duplex unit is not set cor-
rectly, or an error has occurred 
in the duplex unit.

Set the duplex unit correctly. If 
the message appears again, 
call your sales or service repre-
sentative.

RPCS graphic error.

There is insufficient graphics 
memory to print the data.

Specify the correct memory 
capacity in the [Change Acces-
sories..]

 option in the RPCS™ 

printer driver's print settings 
tab.

To print the image correctly, 
add memory to the machine, 
or reduce the resolution of the 
image.

RPCS memory overflow.

A memory overflow occurred 
during the print job. After part 
of the data is printed, the print 
job is suspended.

To print the image correctly, 
add memory to the machine, 
or reduce resolution.

RPCS syntax error.

Bidirectional transmission 
may not be working properly 
or the RPCS™ printer driver 
settings may not be correct.

Confirm the option settings 
for the printer driver match 
the options installed on the 
machine.

Selected paper tray is in use 
for another function. Please 
wait.

The specified paper tray is in 
use by another function such 
as copier function.

Wait until the other function 
has finished using the speci-
fied paper tray.

Shift tray has a problem. Call 
service representative.

A malfunction occurs when 
using the shift function.

Contact your sales or service 
representative.

Staple has been cancelled.

Staple printing has been can-
celed.

Confirm paper feed direction, 
paper orientation and stapling 
position.

dStaple is almost empty.

There are a few staples re-
maining.

Load in more staples.

Staple unit is in use for anoth-
er function. Please wait.

The staple unit is in use by an-
other function such as copier 
function.

Wait until the other function 
has finished using the staple 
unit.