OKI 5300n Benutzerhandbuch
MAC OS X > 106
CONFIGURING INSTALLED HARDWARE OPTIONS
When you set up a printer using AppleTalk or USB, the printer’s
installed hardware options are normally detected and automatically
configured. However, if you are setting up a printer using TCP/IP, or
have added any additional hardware options since setting up the
printer, you need to manually configure installed hardware options.
installed hardware options are normally detected and automatically
configured. However, if you are setting up a printer using TCP/IP, or
have added any additional hardware options since setting up the
printer, you need to manually configure installed hardware options.
TO MANUALLY CONFIGURE INSTALLED HARDWARE
OPTIONS:
OPTIONS:
1.
Launch the
Print Center utility. This is located in the
Applications/Utilities folder.
2.
Select the printer model in
Print Center.
3.
From the
Printers menu, select Show Info.
NOTE
This information is for Mac OS X 10.2 or higher only. This feature is not
available on Mac OS X 10.0 - 10.1.5.
available on Mac OS X 10.0 - 10.1.5.