MINOLTA 330 Benutzerhandbuch

magicolor 330 - Base Engine Service Manual

9-79

Removal and Replacement Procedures

1. Remove the MSI Assembly (RRP 9.22).

2. Remove the two screws securing the Main Paper Handling Cover to the Main Paper Handling Assem-

bly and remove the Cover.

3. Remove the Pre-Registration Chute Assembly (RRP 9.38).

4. Pry free the front and rear pivot arms located at the bottom of the Paper Handling Turn Chute Assem-

bly and lift up on the bottom of the Chute Assembly.

5. Pry free the front and rear pivot arms located at the top of the Paper Handling Turn Chute Assembly

and remove the Chute Assembly from the Main Paper Handling Assembly.

1. Insert the front and rear pivot arms located at the top of the Paper Handling Turn Chute Assembly into

the holes at the top of the Main Paper Handling Assembly.

2. Swing the Paper Handling Turn Chute Assembly down into position and insert the front and rear pivot

arms located at the bottom of the Paper Handling Turn Chute Assembly into the holes at the bottom of

the Main Paper Handling Assembly.

3. Reinstall the Pre-Registration Chute Assembly (RRP 9.38).

4. Reinstall the Main Paper Handling Cover onto the Main Paper Handling Assembly and use two screws

to secure the Cover to the Assembly.

5. Reinstall the MSI Assembly (RRP 9.22).