MINOLTA 330 Benutzerhandbuch
magicolor 330 - Base Engine Service Manual
3-33
Primary FIPS: Error Messages
3.30 - Error Message: Yellow Toner Missing
The Yellow Toner Cartridge is either not installed or not installed correctly.
Logic control on the MCU PWB did not receive a signal from the Cartridge Sensor when the Rotary Frame moved
the Yellow Developer Housing into position.
Logic control on the MCU PWB did not receive a signal from the Cartridge Sensor when the Rotary Frame moved
the Yellow Developer Housing into position.
Step
Actions and Questions
Yes
No
SUSPECT COMPONENTS
The following components are associated with this specific prob-
lem. One or more of these components may have failed partially
The following components are associated with this specific prob-
lem. One or more of these components may have failed partially
or completely. If you cannot isolate the problem using this FIP,
replace each component listed below, one at a time, until the prob-
lem disappears.
replace each component listed below, one at a time, until the prob-
lem disappears.
• Wiring and connectors linking the components
• Rotary Frame Assembly (RRP 9.67)
• Rotary Frame Assembly (RRP 9.67)
1
YELLOW TONER CARTRIDGE RESEAT
1. Remove the Yellow Toner Cartridge.
2. Reinstall the Yellow Toner Cartridge.
2. Reinstall the Yellow Toner Cartridge.
Does the error message still appear?
Go to step 2
Treat as an
intermittent
problem.
intermittent
problem.
2
Replace the Yellow Toner Cartridge (RRP 9.55)
Does the error message still appear?
Go to step 3
Problem
solved
solved
3
Replace the Toner Cartridge Sensor (RRP 9.69)
Does the error message still appear?
Go to step 4
Problem
solved
4
Replace the MCU PWB (RRP 9.123)
Does the error message still appear?
Go to suspect
components
components
Problem
solved
solved