HP (Hewlett-Packard) CF040ARBGJ Benutzerhandbuch

If the printed output has colored shadows, blurry graphics, or areas that have poor color, you might

need to calibrate the product to align the colors. Print the diagnostics page from the 

Reports

 menu on

the control panel to check the color alignment. If the blocks of color on that page are not aligned with

each other, you need to calibrate the product.

On the product control panel, open the 

System Setup

 menu.

Open the 

Print Quality

 menu, and select the 

Color Calibration

 item.

Select the 

Calibrate Now

 option.

Check each print cartridge, and replace it if necessary, if you are having any of the following

problems:

●

The printing is too light or seems faded in areas.

●

Printed pages have small unprinted areas.

●

Printed pages have streaks or bands.

If you are using a draft print setting, the printing might appear light.

The supplies status page indicates the estimated life remaining in print cartridges and the imaging

drum. It also lists the part number for the correct genuine HP print cartridges and imaging drum for your

product so you can order replacements.

On the product control panel, open the 

Reports

 menu.

Select the 

Supplies Status

 page to print it.

On the product control panel, open the 

Reports

 menu.

Select the 

Print Quality Page

 item to print it.

This page contains five bands of color, which are divided into four groups as indicated in the following

illustration. By examining each group, you can isolate the problem to a particular print cartridge.

164

Chapter 8   Solve problems

ENWW