HP (Hewlett-Packard) LCS60 Benutzerhandbuch

PPP

Continued

[ ? for help, q to quit, RETURN for menu ]

==>

NOTE: 

Changes to the configuration will not take effect until you:

- enter the lcsadm command and then type "stop tcpip" from the

top command directory to stop TCP/IP protocol.

- enter the lcsadm command and then type "start tcpip" from the

top command directory to start TCP/IP protocol.

Top>Config>#

12 .  From the Top directory, enter start all.

In order for changes made to the IP network number or subnet
mask to take effect, you must first stop and then restart tcpip and
routed

.

13 .  To complete PPP configuration, you must configure the client side of the

service. Refer to the documentation included with your client software;
examples of some software packages are given in Appendix F.

To unconfigure PPP service, stop the service using the stop ppp command, enter
maxsessions

at the Top

>

>

# prompt, and choose option 2 to delete the

service.

One of the following types of dialstrings (shown with the area/exch/name from the
example in Figure 4-1) may be used to connect to the LCS60 for PPP service.