HP (Hewlett-Packard) LCS60 Benutzerhandbuch

Gateway

DESTINATION:

Login:

The Lucent Technologies data switch speedcall feature can also be used. In the
following screen, the first speedcall is entered such that telnet = brown.telnet;
the second speedcall is entered such that the host moon = brown.telnet..moon
(refer to the Lucent Technologies data switch documentation for details on set-
ting up speedcall names).

DESTINATION:

telnet>

Login:

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

DESTINATION:

Login:

A user on a host or workstation connected by means of an Ethernet LAN to an
LCS60 can use the LCS60 to connect to data switch connected hosts. Examples of
TCP-to-async gateway connections are shown in Figure 7-1.

To use the TCP-to-async gateway service, the user can issue a telnet command to
the LCS60’s IP address with or without the use of a service port.  If no service
port is configured, enter the call address of the data-switch connected host.  Log
on in the usual manner. An example is given below.

A service port may also be configured with a PDD, connecting the user to the
destination host with a telnet command as shown in the second example in the
following screen.  In this example, service port 2222 has been configured as a tel-
net port with a PDD of mlkway/earth/watson.