HP (Hewlett-Packard) LCS60 Benutzerhandbuch

StarKeeper II NMS

6 .  Remove the floppy diskette or tape from the drive when installation is

complete.

7 .  Enter exit

to restore the user id to cnmsadm.

8 .  Re-start the StarKeeper II NMS:

a .  At  the SK: prompt, enter SKsh; this displays the main menu

b .  Choose SYSADM ; this displays the sysadm menu

c .  Choose STARTSK; select y to continue with startup.  Enter

when you see the startup completed message.

d .  Exit  the SKsh program by pressing

and then y at the

Exit the Menu Program?

prompt.

9 .  You can now configure the database to monitor individual LCS60s (see

below).

–

After the software package has been installed, the network administrator can
configure the StarKeeper II NMS’s database to monitor individual LCS60s.

1 .  Log on to StarKeeper II NMS as cnmsadm.

2 .  At  the SK: prompt, enter SKsh

.

This displays the selection

menu.  Select the "Configuration Commands" by entering c

;

this

displays the Network Elements menu.

3 .  Select menu item System/Node by pressing

.

This displays the

"Configure a System/Node" menu.

4 .  Select menu item Add by pressing

5 .  At System/Node name enter the name of the LCS60 (e.g., morse

,

in

the example in Figure 3-1).

6 .  At Type enter L60

.

7 .  At Release enter 3.0

.