HP (Hewlett-Packard) LCS60 Benutzerhandbuch

Appendix D

This appendix applies to the Fujitsu and Seagate ST5660N disk drives
which were used in Release 1.0 and 2.0 of the LCS60.  Release 3.0 is
equipped with a Seagate ST11200N disk drive; procedures for the R3.0
drive are given in Chapter 9.

If the system crashes, it may be necessary to reload the system software by:

1 .  Installing the UNIX System software

2 .  Installing the UFS Utility Fixes tape (Chapter 9)

3 .  Removing  the inet package (Chapter 9)

4 .  Installing the LCS60 application software (Chapter 9).

Once the UNIX Software has been loaded, the LCS60 must not be
reset or powered off without first shutting down the system
(/etc/shutdown -y -g0 -i0). Resetting or powering off the system may
result in file damage.

To install the UNIX System software:

1 .  Power off the LCS60.

2 .  Insert the UNIX System installation tape (tape 1 of 3) in the tape drive.

(Insert the tape with the label toward the left and the tape guard down.)

3 .  Turn the machine on; this will generate the autoboot.

4 .  Abort the autoboot by hitting the

key; this will display the

debugger prompt:

197-Bug>

.