HP (Hewlett-Packard) LCS60 Benutzerhandbuch

Hardware

The LCS60 is supplied with the operating software already installed; therefore,
installation consists mainly of installing hardware and configuring the system.

The list below identifies the tasks, in the order that they should be performed, to
install and configure the product.  These tasks are discussed in detail in the fol-
lowing sections.

1 .  Mount the LCS60

2 .  Attach the console to the LCS60

3 .  Connect the fiber between the LCS60 and the CPM-HS

4 .  Configure the LCS60 in the data switch

5 .  Power-up the LCS60

6 .  Verify the LCS60 console connection

7 .  Verify the LCS60 fiber connection

8 .  Configure the LCS60 using the lcsadm interface (Chapters 3– 7)

9 .  Verify connections between the LCS60 and LAN hosts and between the

LCS60 and data switch connected endpoints (Chapter 9).

Table 2-1 lists the LCS60 controls and indicators.