Hitachi C9295A#B1H Benutzerhandbuch

This section contains the following topics:

•

•

You can print on both sides of a sheet of paper automatically when the optional automatic
two-sided printing accessory (duplexer) is installed. For information on using the
duplexer, see 

.

Install the duplexer
1. Push the buttons on the rear access panel and remove the panel from the device.
2. Slide the duplexer into the device until the unit locks into place. Do not press the

buttons on either side of the duplexer when installing the unit; use them only for
removing the unit from the device.

This section contains the following topics:

•

•

•

When you install or remove the duplexer, you need to activate or deactivate the accessory
on the device control panel.

To activate or deactivate the duplexer
▲ Press and hold   Cancel button and   Network button for five seconds. After you

release the buttons, the device will print a report letting you know that the duplexer
has been activated.

14

Install the accessories