Genicom microLaser 210 Benutzerhandbuch
Publication No. GEG-99054
Genicom
Mar 00
5-28
microLaser 210 User Guide
Warning Messages and Error Messages
Warning Messages and Error Messages
Error Messages
The table below lists error messages, the possible causes of each error, and the actions required to
recover from each error.
recover from each error.
Error Message
Line 1
Line 1
Error Message
Line 2
Line 2
Possible Cause
Action
E2 JAM MISFEED
E3 JAM FUSER
E4 EXIT JAM
E6 JAM OFF. TRAY
E7 JAM DUPLEX
E3 JAM FUSER
E4 EXIT JAM
E6 JAM OFF. TRAY
E7 JAM DUPLEX
Remove Paper
There is a paper jam
inside the printer.
inside the printer.
Remove the jammed paper from
the indicated location.
See the “Paper Jams” on page
5-4 for information about
removing paper jams.
the indicated location.
See the “Paper Jams” on page
5-4 for information about
removing paper jams.
E5 COVER OPEN
Close Top Cover
The top cover is open.
Close the top or rear cover.
E5 COVER OPEN
Close Rear
Cover
Cover
The rear cover is open.
Close the offset tray cover.
J3 TONER CART.
Install/Reset
The toner cartridge is
not installed, or an
incorrect cartridge is
installed.
not installed, or an
incorrect cartridge is
installed.
Install the correct toner cartridge
according to the specifications.
See “Replacing the Toner
Cartridge” on page 4-3.
according to the specifications.
See “Replacing the Toner
Cartridge” on page 4-3.
TRAY 1 MISSING
Insert Tray
Tray 1 is not in the
printer.
printer.
Insert the tray.
TRAY 2 MISSING
Insert Tray
Tray 2 is not in the
optional feeder.
optional feeder.
Insert the tray.
TRAY 3 MISSING
Insert Tray
Tray 3 is not in the
optional feeder.
optional feeder.
Insert the tray.
LOAD PAPER TRAY1
Paper Size/
Paper Type
Paper Type
Tray 1 is empty.
Load paper into the tray.
LOAD PAPER TRAY2
Paper Size/
Paper Type
Paper Type
Tray 2 is empty.
Load paper into the tray.
LOAD PAPER TRAY3
Paper Size/
Paper Type
Paper Type
Tray 3 is empty.
Load paper into the tray.
LOAD PAPER FRONT
Paper Size/
Paper Type
Paper Type
The front tray is empty.
Load paper into the tray.
PAPER SIZE ERROR
Paper Size/
Press Start
Press Start
The paper size is not
supported by the
printer.
supported by the
printer.
Check paper size specifications
and load paper that meets
specifications.
and load paper that meets
specifications.
OUTPUT TRAY FULL
Remove Paper
The output tray is full.
Remove paper from the tray.
OFFSET TRAY FULL
Remove Paper
The offset output tray is
full.
full.
Remove paper from the tray.
PAPER PATH ERROR
Close Face Up
The face up tray is
open.
open.
Close the face up tray.