Fujifilm MP-300 Benutzerhandbuch

P

rin

tin

g

Printing

x  For information on using your digital 

camera, refer to the owner’s manual 
supplied with the camera.

On some digital camera models, the digital camera should be turned off 
at this point. Because the transmission method varies depending on the 
model used, check the owner’s manual for your digital camera.

Setting up for USB transmissions

Select PictBridge in the digital 
camera’s USB setting.

x  When the printer and the digital camera 

are correctly connected, the PictBridge 
lamp will light after MP-300 power on.

x  Use the USB cable supplied with 

the digital camera. Do not use an 
extension cable or USB hub.

x  The location of the USB socket varies 

depending on the digital camera used.

Connect the digital camera to the 
printer.

Lit

Lit

Hold down the POWER button (one 
second or more) to turn the printer on.

x The POWER button lights.
x If you leave the printer on, it automatically 

turns off (after 3 minutes when using 
batteries and after 10 minutes when 
using the AC power adapter).

Check the fi lm counter to ensure that 
there is still fi lm in the printer.

 Turning on the power.

Printing

P I C T B R I D G E

P I C T B R I D G E

ENGLISH

ENGLISH
SET

SET

NTSC

NTSC

1

3

2

OK

OK

 Select the image on the digital 
camera and then print the image.

The film is fed out roughly 20 seconds 
after the printer receives the image.

Lit (POWER button)

Lit (PictBridge lamp)

Take the print out when the POWER 
button stops blinking and stays lit.
x When the POWER button stops 

blinking and stays lit, the next image 
can be transferred.

x See “Notes on taking out fi lm”. (P.25)

 Take the film out when film 
output ends.

Blinking

Lit

x  The POWER button blinks slowly 

during image transfer.

x  For information on using your digital 

camera, refer to the owner’s manual 
supplied with the camera.

x  If multiple prints have been specifi ed, 

refer to P.31.

Rapid Blinking (POWER button)

Lit (PictBridge lamp)

x The POWER button blinks rapidly 

during printing.

x Printing of a VGA-size (FUJIFILM 

standard) image takes 20 seconds 
once the infrared signal is received.

x Printing may take longer for images 

larger than VGA-size.

On some digital camera models, the digital camera should be turned on 
at this point. Check the owner’s manual for your digital camera.