Zebra Technologies P640i Benutzerhandbuch

980541-001 Rev. A

P640i Card Printer User Guide

31

 

is an optional hardware key encoded with a serial number that is compared prior to every

print job with a number in the printer’s NVRAM. If there is a mismatch, the printer is disabled. 

ID/Code 

is a field-alterable password stored by both the printer dirver and the printer itself. It pre-

vents use of the printer with a PC not having the same 

ID/Code

. Check the

 ID/ Code 

if the printer fails

to function, and everything else looks fine. Reference 

Password protection blocks access to some of the lower level printer adjustment screens. Not to be
confused with ID/Code. Reference 

Interlock “cheating” is not something the operator should do, but as a technician you will need to run
the P640i with the main cover open. Cut a narrow strip of plastic from a used CR-80 card, fold it,
then push it into the interlock slot in the center wall. When the ALARM light goes out, the interlock
switch is closed. 

You can return the printer to its previous backup configuration be pressing the
PRINT, RIBBON and LAMINATE buttons on the front panel at the same time as
the printer is powered up. But first, remove the color ribbon! This is termed a
“three button reset,” page TN1-4

Any time you open the main cover, for whatever reason, be sure that the flip
station is fully down before the cover is closed. Do this by gently pushing down
at the back of the flip carrier.