Zebra Technologies RZ400 Benutzerhandbuch
Operations
Print Modes and Printer Options
Print Modes and Printer Options
40
79695L-003
Z Series
®
/RZ™ Series User Guide
1/11/11
Print Modes and Printer Options
The printer can use different print modes and options for label removal (
). Use a print
mode that matches the media being used and the printer options available. For more
information on the types of media, see
information on the types of media, see
. To select a print mode, see
.
Print Mode Descriptions and Printer Requirements
Table 7 • Print Modes and Printer Options
Print Mode
When to Use/Printer Options Required
Printer Actions
Tear-Off
(default setting)
(default setting)
Use for most applications. This mode can
be used with any printer options and most
media types.
be used with any printer options and most
media types.
The printer prints label formats as it
receives them. The printer operator can tear
off the printed labels any time after they
print.
receives them. The printer operator can tear
off the printed labels any time after they
print.
Peel-Off
Use only if the printer has the Peel-Off,
Liner Take-Up, or Rewind option.
Liner Take-Up, or Rewind option.
The printer peels the label from the liner
during printing and then pauses until the
label is removed.
during printing and then pauses until the
label is removed.
In Peel-Off mode, the liner exits the front of
the printer. In Peel-Off mode with Liner
Take-Up, the liner winds onto the liner
take-up spindle or the rewind spindle.
the printer. In Peel-Off mode with Liner
Take-Up, the liner winds onto the liner
take-up spindle or the rewind spindle.
Cutter
Use if the printer has a cutter option when
you want the labels to be cut apart.
you want the labels to be cut apart.
The printer prints a label and then cuts it
free.
free.
Delayed Cut
Use if the printer has a cutter option when
you want the printer to cut the labels apart
at a signal.
you want the printer to cut the labels apart
at a signal.
The printer prints a label, pauses, and cuts
the label when it receives the ~JK (delayed
cut) ZPL command.
the label when it receives the ~JK (delayed
cut) ZPL command.
Rewind
Use if the printer has the Rewind option and
you want the labels to rewind on a core.
you want the labels to rewind on a core.
The printer prints without pausing between
labels. The media or liner is wound onto a
core after printing.
labels. The media or liner is wound onto a
core after printing.
RFID
Use when printing RFID labels with
RZ Series printers or with Z Series printers
that have an optional RFID reader/encoder
installed.
RZ Series printers or with Z Series printers
that have an optional RFID reader/encoder
installed.
The printer increases throughput time when
printing batches of RFID labels by
eliminating backfeed between labels
printing batches of RFID labels by
eliminating backfeed between labels
Linerless Peel
Reserved for future options.
Reserved for future options.
Linerless
Rewind
Rewind
Reserved for future options.
Reserved for future options.
Linerless Tear
Reserved for future options.
Reserved for future options.