Zebra Technologies P330m Benutzerhandbuch
Installation and Setup
Connecting the Printer to your Computer
980459-001 Rev C
P330i & P330m Card Printer User’s Manual
21
Connecting the Printer to your Computer
The P330i or P330m Printer includes a standard USB interface.
As an option, either printer model can be ordered with a 10/100base-T Ethernet Adapter (in
addition to the USB interface). The Ethernet Adapter can also be ordered as an add-on option
and installed in the field by a Zebra factory certified technician.
addition to the USB interface). The Ethernet Adapter can also be ordered as an add-on option
and installed in the field by a Zebra factory certified technician.
1.
If using the USB interface, use the supplied USB cable to connect between the USB
connector on the printer and a USB port on the computer, as shown below. (Note that the
figure below shows the optional Ethernet Adapter directly above the USB Connector; this
may not be present on your printer.)
connector on the printer and a USB port on the computer, as shown below. (Note that the
figure below shows the optional Ethernet Adapter directly above the USB Connector; this
may not be present on your printer.)
2.
If your printer includes the optional Ethernet Adapter as well as the standard USB
connection, use either the supplied USB cable or a standard Ethernet cable to connect the
printer to a corresponding port on the computer or network.
connection, use either the supplied USB cable or a standard Ethernet cable to connect the
printer to a corresponding port on the computer or network.
USB Connector
Power
Connector
Connector
Power
Switch
Switch
(Optional)
Ethernet
Connector
Ethernet
Connector
Important •
Do not use both USB and Ethernet connections at the same time!
Important •
Intermittent or unpredictable operation may occur from unsecured connectors.
If damaged, the power cable must be replaced by an exact equivalent.