Zebra Technologies Z4000 Benutzerhandbuch
Z Series™ User’s Guide
39
SYMPTOM
DIAGNOSIS
ACTION
Wrinkled ribbon.
Ribbon fed through
printer incorrectly.
Reinstall ribbon.
Incorrect Darkness
setting.
Set to the lowest value
needed for good print
quality.
Incorrect Printhead
pressure.
Readjust Printhead
pressure.
Media not feeding
properly; it is walking
from side to side.
Readjust Media Guides.
Continuing problems.
Call a Service Technician.
Misregistration and
misprint of 1 to 3 labels.
Media was pulled when
motor was not moving.
Open and close the
printhead so it
calibrates to find the
label length.
Incorrect Media Sensor
Position.
Reposition Media
Sensor.
Media or ribbon
improperly loaded.
Reload Media and
Ribbon.
Changes in parameter
settings did not take
effect.
Parameters are set or
saved incorrectly.
Reload the Factory
Defaults, reconfigure
the printer, cycle the
Power OFF and ON.
Continuing problems.
Call a Service Technician.
ZPL was sent to printer,
but not recognized. The
DATA LED remains
OFF.
Communications
parameters or DIP
Switches are set
incorrectly.
Check and reset
communication
parameters if needed.
Prefix and delimiter
characters set in printer
configuration do not
match the ones sent in
the ZPL Label Formats.
Set the characters in the
printer to match ZPL
format.
Check Configuration
Label for correct
characters.
If problem continues,
check the ZPL format
for changed ^CC,
^CT, and ^CD
instructions.
Continued on the following page.
47
H:...uspiran2.vp
Thu Jun 18 16:02:05 1998
Color profile: Disabled
Composite Default screen