Zebra Technologies UMAN-QLP-001 Benutzerhandbuch

QL Plus Series User Guide

You can operate QL Plus printers in one of two different

modes: Tear-Off or Peel-Off. Tear-Off mode allows you to tear 
off each label (or a strip of labels) after it is printed. In Peel-Off 
mode, the backing material is peeled away from the label as it 
is printed. After you remove this label, the next one is printed.

1. Open the printer: Refer to Figure 6 (QL 420 shown).  

•  Press the latch release button on the side of the printer

as shown at “1” below.  The latch assembly will  flip open 
automatically

•  On the QL 420 Plus only, pull up the latch assembly com-

pletely as shown at “2” to unlatch the Media Cover.

•  Rotate the Media Cover back as shown at “3”, exposing

the media compartment and the adjustable media sup-
ports.

Media Supports

Media Compartment