Zebra Technologies P110I Benutzerhandbuch

Loading Cards

980515-001 Rev. A

P110i User’s Manual

19

To help you load, print, and collect cards, the P110i has the following items:

The card feeder is used for loading cards, it can hold up to 100 cards of 30 mils thickness. The 
card feeder is located under the card feeder cover

of the P110i printer.

Load cards into card feeder as follows:

Open card feeder cover.

Slide card guide all the way to the right until it locks in place with an audible click.

Remove cellophane wrapper from card stack.

bend cards or touch print surfaces as this can reduce print 

quality. 

The surface of the cards must remain clean and dust free. Always store cards in 

an enclosed container. Ideally, use cards as soon as possible. If cards stick together, 
carefully fan or shuffle them.

For Cards with magnetic stripe refer to Appendix A for loading instructions.

Static charges and edge burrs from the card die-cutting process can render individual 

cards stuck together with significant adhesion force. These cards must be physically 
separated from each other before inserting into the feeder; if not separated, feeding or 
printing problems may occur.