Zebra Technologies Z6Mplus Benutzerhandbuch

46

Z4Mplus/Z6Mplus User Guide

13163L Rev. 3 5/20/2004

Adjust Printhead Pressure

See 

. This adjustment may be necessary if printing is too light on one side or if thick 

media is used.

The pressure adjustment dials for the Z4Mplus each have four possible settings designated by 
blocks of increasing size embossed on the print mechanism. The smallest block (fully 
counterclockwise) is considered position 1 and the largest block (fully clockwise) is 
considered position 4. The same is true for the Z6Mplus, except it has seven positions.

Depending on which printer you have, use 

 or 

 to select the initial dial settings 

for your media.

Some media types require higher pressure to print well. For these media, increase both dials 
one position. If the media tends to shift to the left while printing, increase the right dial setting 
one position or decrease the left dial setting one position. If the media tends to shift to the right 
while printing, increase the left dial setting one position or decrease the right dial setting one 
position.

1 in. (25.4 mm)

3

1

2 in. (51 mm)

4

1

3 in. (76 mm)

3

2

3.5 in. and up (89 mm and up)

3

3