Zebra Technologies zebra p330 Benutzerhandbuch
26
P330i User’s Manual
980459-001 Rev. A
Printing a Card
Printing a Sample Card
Also from the Tools window, the Test Card can be selected from several pre-loaded styles.
“Single Feed Options” allows Disabling or Enabling Single Feed Support.
• If “Disable Single Feed Support” is selected, when the P330i Card Printer runs out of
cards in the feeder, the LCD display will read OUT OF CARDS. To continue, press
the panel button.
the panel button.
• If “Enable Single Feed Support” is selected, when the P330i Card Printer runs out of
cards in the feeder it will wait until a card is inserted in the single-card slot or cards
are loaded in the feeder, and then will automatically continue.
are loaded in the feeder, and then will automatically continue.
Printing a Sample Card
Sample card designs are installed with the printer driver. Sample cards require Microsoft Word
or Microsoft Paint application software. The cards are accessed via the Start menu. Select
Start, select Programs, select Zebra Card Printers, and select a sample card, or follow the
directions below to design a card.
or Microsoft Paint application software. The cards are accessed via the Start menu. Select
Start, select Programs, select Zebra Card Printers, and select a sample card, or follow the
directions below to design a card.
Follow these steps to design and print your first card:
1.
Launch Microsoft Word Software. Depending on your computer configuration this may be
done by double-clicking an icon on your desktop, or by clicking the Windows Start icon,
selecting Programs, and navigating to Microsoft Word
done by double-clicking an icon on your desktop, or by clicking the Windows Start icon,
selecting Programs, and navigating to Microsoft Word
2.
Go to the File menu and choose Page Setup.
3.
Select the Paper Size tab, choose Card. Under orientation, select Landscape.
4.
Select the Margins tab, and set the Top, Bottom, Left, and Right margins to 0 (zero).
5.
Click OK to close the Page Setup window.
6.
The card appears on the screen.
7.
Design a card with both black and colored text and with colored pictures (see example
below).
below).
us!
http://www.zebracard.com
Note •
For cards thinner than 20 mils (0.51 mm) or thicker than 40 mils (1.02 mm), the card
design must be limited to (1) no more than two 30 mm x 30 mm areas of full color, (2) black
information (text and barcode, for example) must cover no more than 50% of the card area,
and (3) there must be at least a 5mm unprinted border along all edges.
For cards with thickness between 20 mils (0.51 mm) and 40 mils (1.02 mm), these
restrictions do not apply; full color printing is permitted edge to edge in both directions.
information (text and barcode, for example) must cover no more than 50% of the card area,
and (3) there must be at least a 5mm unprinted border along all edges.
For cards with thickness between 20 mils (0.51 mm) and 40 mils (1.02 mm), these
restrictions do not apply; full color printing is permitted edge to edge in both directions.