Zebra Technologies Z4Mplus Benutzerhandbuch
104
Z4Mplus and Z6Mplus User Guide
Troubleshooting
Print Quality Problems
Intermittent creases on the left and right edges of the label
Wrinkled ribbon
Problem
Solution
There is too much pressure on
the printhead.
the printhead.
Reduce the printhead pressure. See
Problem
Solution
The ribbon is not loaded
correctly.
correctly.
Load the ribbon correctly. See
.
The darkness setting is
incorrect.
incorrect.
Set the darkness to the lowest possible
setting for good print quality. See
setting for good print quality. See
.
Incorrect printhead pressure or
balance.
balance.
Set the pressure to the minimum required
for good print quality. See
for good print quality. See
The media is not feeding
correctly. It is walking from side
to side.
correctly. It is walking from side
to side.
Make sure that the media guide and media
supply guide touch the edge of the media.
supply guide touch the edge of the media.