Zebra Technologies Z6M Benutzerhandbuch
10
Zebra Z4M/Z6M Printers User’s Guide
$GMXVWLQJWKH5HIOHFWLYH6HQVRU
Refer to Figure 7.
1. Open the printhead assembly by pressing the printhead open lever.
2. Locate the reflective sensor positioning lever.
3. Move the reflective sensor positioning lever across the width of the media until the
reflective sensor aligns with the start-of-label indicator. The glow of the red light
assists in the proper placement of the reflective sensor.
assists in the proper placement of the reflective sensor.
4. Close the printhead assembly.
7UDQVPLVVLYH6HQVRU
The transmissive sensor is in a fixed position and enabled via the front panel (refer to
“SENSOR SELECT” on page 41 for details).
“SENSOR SELECT” on page 41 for details).
Figure 7
Printhead Assembly
Reflective
Sensor
Positioning
Lever
Reflective
Sensor
Printhead Open
Lever