Zebra Technologies 79695L-002 Benutzerhandbuch
93
Configuration
Standard Control Panel Parameters
6/6/08
Z Series
®
/RZ™ Series User Guide
79695L-002 Rev. A
Select Idle Display
This parameter selects the LCD options for the real-time clock.
This parameter selects the LCD options for the real-time clock.
Note •
If the default value is not selected, pressing
PLUS (+)
or
MINUS (-)
briefly displays the firmware version of the printer.
Default Value: FIRMWARE (FW) VERSION
Selections: MM/DD/YY (24HR), MM/DD/YY (12HR), DD/MM/YY
(24HR), DD/MM/YY (12HR), FW VERSION
(24HR), DD/MM/YY (12HR), FW VERSION
To change the value shown:
1.
Press
SELECT
to select the parameter.
2.
Press
PLUS (+)
or
MINUS (-)
to scroll through the options.
3.
Press
SELECT
to accept any changes and deselect the parameter.
Set Real-Time Clock (RTC) Date
This parameter allows you to set the date following the convention selected
in
This parameter allows you to set the date following the convention selected
in
IDLE DISPLAY
.
To change the value shown:
1.
Press
SELECT
to select the parameter.
2.
Press
MINUS (-)
to move to the next digit position.
3.
Press
PLUS (+)
to change the value of the digit.
4.
Press
SELECT
to accept any changes and deselect the parameter.
Set RTC Time
This parameter allows you to set the time following the convention selected
in
This parameter allows you to set the time following the convention selected
in
IDLE DISPLAY
.
To change the value shown:
1.
Press
SELECT
to select the parameter.
2.
Press the left oval
MINUS (-)
to move to the next digit position.
3.
Press the right oval
PLUS (+)
to change the value of the digit.
4.
Press
SELECT
to accept any changes and deselect the parameter.
Specify Password Level
This parameter allows you to select whether certain factory-selected menu
items or all menu items are password protected.
This parameter allows you to select whether certain factory-selected menu
items or all menu items are password protected.
Default Value: SELECTED ITEMS
Selections: SELECTED ITEMS, ALL ITEMS
1.
Press
SELECT
to select the parameter.
2.
Press
PLUS (+)
or
MINUS (-)
to toggle between the options.
3.
Press
SELECT
to accept any changes and deselect the parameter.
Table 12 • Printer Parameters (Page 25 of 26)
Language/Parameter
Action/Explanation