Zebra Technologies 79695L-002 Benutzerhandbuch

Additional Control Panel Parameters

6/6/08

Z Series

®

/RZ™ Series User Guide

79695L-002 Rev. A

Read and Display RFID Tag Data
When this option is selected, the reader attempts to read a tag over the 
RFID antenna, even if the printhead is open. Results are displayed in 
hexadecimal format. The printer rereads the tag every 2 seconds, so if the 
tag changes, data is displayed for the current tag over the antenna.

•

If no tag data can be read, the text 

NO DATA

 appears on the bottom 

line of the LCD display.

•

If a tag is present, the data for that tag appears on the bottom line of the 
display in hexadecimal format. If there is more data than can fit on the 
bottom line (such as for 96-bit tags), the bottom line will cycle from 
the first 8 bytes (most significant) to the next 4 bytes (least significant) 
approximately every 2 seconds. The hexadecimal data that can fit on 
two screens is displayed and cycled through.

For example, if the tag contains the data 

0x112233445566778899001122

, when this option is selected, 

the bottom line of the display shows: 

1122334455667788

 for 2 

seconds followed by 

99001122

 for 2 seconds. The printer cycles 

through these indefinitely.

Position an RFID label with its transponder over the RFID antenna 
(coupler) location (

). No movement occurs.

RFID TAG DATA