Zebra Technologies GX430D Benutzerhandbuch

Printing a Test (Printer Configuration) Label

8/4/10

GX420d™ / GX430d™ User Guide

980611-001 Rev. C

Before you connect the printer to your computer, make sure that the printer is in proper 
working order.  

You can do this by printing a configuration status label.

Make sure the media is properly loaded and the top cover of the printer is closed.  Then, 
turn the printer power on if you have not already done so. If the printer initializes with the 
status light blinking green (pause mode), press the Feed button once to set the printer in 
Ready (to print) mode. See the 

 if the printer’s status light 

does not turn solid green (Ready).

Press the Feed button two to three times to allow the printer to calibrate the printer for the 
installed media. The printer may feed several labels during this process.

When the status light is solid green, press and hold the Feed button until the status light 
flashes once.

Release the Feed button.  A configuration label will print.

If you cannot get this label to print, refer to 

.