Orbit Manufacturing 2000 Benutzerhandbuch
Page 1 - 19
Safety
Orbit™ 2000 Operation and Maintenance Manual
© GBC Films Group January 2001
1.9 Safety - Rules for the position adjustment of the decurling
bar
During lamination internal stress develops between paper and the chrome roller. The decurling
bar straightens the sheets before they exit the lamination section. During adjustment of the bar, the
following safety rules must be observed:
following safety rules must be observed:
1/
W A R N I N G
CAUTION: Exercise caution while loosening the decurling bar handle.
The securing screw and the edge of the groove on the regulating
wheel may collide during sudden loosening.
2/
W A R N I N G
CAUTION: Exercise caution while adjusting the control lever position.
During sudden change in the position of the control lever, the set-up
lever of the decurling bar may be hit.
3/
W A R N I N G
CAUTION: Do not place your fingers near the groove on the regulating
wheel while changing the position of the decurling bar.
4/
W A R N IN G
C A U T IO N : D ue to heat em inating from the chrom e roller and pressu re
roller area, avoid con tact w ith the decurling bar.