Sony PCV-RX370DS Handbuch
VAIO Digital Studio™ User Guide
58
Enabling Ethernet
Your computer comes with a preinstalled Ethernet interface. To enable faster
startup, your computer may ship with this function disabled. You can enable
Ethernet connectivity by following the instructions below.
startup, your computer may ship with this function disabled. You can enable
Ethernet connectivity by following the instructions below.
To enable the Ethernet connection
1
Click on My Computer icon on the desktop.
2
Click on Control Panel, and then click on System.
3
Click the Device Manager tab.
4
Click on the Network Adapters category, and then select "Realtek RTL8139
(A/B/C/8130) PCI Fast Ethernet NIC."
(A/B/C/8130) PCI Fast Ethernet NIC."
5
Click the Properties button.
6
Remove the checkmark from the option "Disable in this hardware profile."
7
Click OK.
8
Close the Control Panel window.
Warning: Your computer has a protective sticker
covering the Ethernet
port located on the rear panel. Connect only 10Base-T and 100Base-TX cables
to the Ethernet port. Using other cables or a telephone cable may result in an
electric current overload and can cause a malfunction, excessive heat or fire
in the port. For help on connecting to a network, see your network
administrator.
to the Ethernet port. Using other cables or a telephone cable may result in an
electric current overload and can cause a malfunction, excessive heat or fire
in the port. For help on connecting to a network, see your network
administrator.