Toshiba M30-35 Benutzerhandbuch

 

If the diagnostics program cannot detect an error, the problem may be intermittent.  The 
Running Test program should be executed several times to isolate the problem.  Check the 
Log Utilities function to confirm which diagnostic test detected an error, then perform the 
appropriate troubleshooting procedures as follows:  

1.  If an error is detected on the system test, memory test, real timer test, perform the 

System Board and Processor Module Troubleshooting Procedures in Section 2.4. 

2.  If an error is detected on the floppy disk test, perform the FDD Troubleshooting 

Procedures in Section 2.5. 

3.  If an error is detected on the hard disk test, perform the HDD Troubleshooting 

Procedures in Section 2.6. 

4.  If an error is detected on the keyboard test, perform the Keyboard Troubleshooting 

Procedures in Section 2.7. 

5.  If an error is detected on the display test, perform the Display Troubleshooting 

Procedures in Section 2.8. 

6.  If an error is detected on the Optical Drive test, perform the Optical Drive 

Troubleshooting Procedures in Section 2.9. 

7.  If an error is detected on the modem test, perform the Modem Troubleshooting 

Procedures in Section 2.10. 

8.  If an error is detected on the LAN test, perform the LAN Troubleshooting Procedures 

in Section 2.11. 

9.  If an error is detected on the Wireless LAN test, perform the Wireless LAN 

Troubleshooting Procedures in Section 2.12. 

10. If an error is detected on the sound test, perform the Sound Troubleshooting 

Procedures in Section 2.13. 

11. If an error is detected on the SD card test, perform the SD card slot Troubleshooting 

Procedures in Section 2.14. 

2-5