Toshiba S4 Benutzerhandbuch

4.6 HDD

4 Replacement Procedures

TECRA S3 Maintenance Manual (960-532)

[CONFIDENTIAL]

4-15

NOTE: The following steps describe how to disassemble the HDD assembly; however, do

not disassemble if the HDD is working properly.

3. Place the HDD assembly on a flat surface, and remove the following screws.

• M3×4S

FLAT HEAD screw

×4

4. Separate the HDD and the HDD bracket.

CAUTION: Do not apply pressure to the top or bottom of the HDD.

Figure 4-6 Separating the HDD

HDD

HDD bracket

×4S FLAT HEAD