Toshiba S4 Benutzerhandbuch

3.  Peel off the glass tape and disconnect the touch pad cable from the connector on the

touch pad.

4.  Remove the following screws and touch pad.

•  M2.5×4B

FLAT HEAD screw

×2

To install the touch pad, follow the steps below and refer to Figure 4-14 and 4-15.

1.  Install the touch pad and secure it with the following screws.

•  M2.5×4B

FLAT HEAD screw

×2

2.  Connect the touch pad cable to the connector on the touch pad and stick the glass

tape.

3.  Install the touch pad assembly to the slot of the palm rest while engaging the latches.

4.  Connect the touch pad cable to the connector CN3201 on the system board.

M2.5

×4B FLAT HEAD

Touch pad

Glass tape

M2.5

×4B FLAT HEAD

Touch pad cable