Toshiba S4 Benutzerhandbuch

4 

Replacement Procedures

To remove the display assembly, follow the steps below and refer to Figure 4-18 to 4-20.

1.  Peel off the insulator and disconnect the finger print sensor cable from the

connector CN9700 on the system board.

2.  Disconnect the speaker cable from the connector CN6170 on the system board.

3.  Turn up the black tape and disconnect the LCD cable from the connector CN5500

on the system board.

4.  Remove the following screws.

•  M2.5×8B

FLAT HEAD screw

×1

•  M2×6S

BIND screw

×1

M2

×6S BIND

M2.5

×8B FLAT HEAD

Insulator

 CN9700

CN5500 CN6170