Toshiba S4 Benutzerhandbuch
4 Replacement Procedures
4.16 USB board
4-40
[CONFIDENTIAL]
TECRA S3 Maintenance Manual (960-532)
Installing the USB board
To install the USB board, follow the steps below and refer to Figure 4-25.
1. Connect the USB cable to the connector CN4610 on the system board.
2. Connect the USB cable to the connector CN4622 on the USB board.
3. Install the USB board in place and secure it with the following screw.
• M2.5×6S Tapping screw
×1