Toshiba S4 Benutzerhandbuch

To install the SR board/DC-IN jack, follow the steps below and refer to Figure 4-27 and 4-
28.

1.  Connect the DC-IN jack cable to the connector CN8800 on the system board (Pass

the cable under the guide) and install the DC-IN jack to the slot.

2.  Connect the SR/USB cable to the connectors CN3421 and CN4611 on the system

board.

3.  Install the serial harness holder and secure it with the following screw.

•  M2.5×6S Tapping screw

×1

4.  Connect the SR/USB cable to the connector CN9510 on the SR board.

5.  Install the SR board to the slot and secure it with the following screw.

•  M2.5×6S Tapping screw

×1

SR/USB cable