Toshiba S4 Benutzerhandbuch

4.21 GFX board

4 Replacement Procedures

TECRA S3 Maintenance Manual (960-532)

[CONFIDENTIAL]

4-51

2. Remove the following screws and disconnect the GFX board from the connector

CN5900 on the system board.

• M2×4B

S-FLAT HEAD screw

×2

Figure 4-34 Removing the GFX board

Installing the GFX board

To install the GFX board, follow the steps below and refer to Figure 4-33 and 4-34.

1. Insert the GFX board into the connector CN5900 on the system board slantwise and

press it to connect firmly.

2. Secure the GFX board with the following screws.

• M2×4B

S-FLAT HEAD screw

×2

3. Install the GPU heat sink in place and secure it with the following screws in the

order of the number marked on the heat sink.

• M2×4B

S-FLAT HEAD screw

×3

×4B S-FLAT HEAD

CN5900

×4B S-FLAT HEAD

GFX board