Toshiba satellite a20 series Benutzerhandbuch
2 Troubleshooting Procedures
2.11 LAN Troubleshooting
Procedure 2
Connector Check and Replacement Check
If the LAN port malfunctions, there may be a bad connection between the RJ-45 jack and the
system board. Or the system board may be damaged.
system board. Or the system board may be damaged.
Disassemble the computer following the steps described in Chapter 4, Replacement Procedures
and perform the following checks:
and perform the following checks:
Check 1 Make sure the RJ-45 jack cable is firmly connected to PJ4100 on system board.
System board
PJ4100
RJ-45
If a connector is disconnected, connect it firmly and repeat Procedure 1. If the LAN
port is still not functioning properly, perform Check 2.
Check 2 The RJ-45 jack may be defective or damaged. Replace the RJ-45 jack with a new one
following the steps in Chapter 4, Replacement Procedures. If the LAN port is still not
functioning properly, perform Check 3.
functioning properly, perform Check 3.
Check 3 The system board may be defective or damaged. Replace the system board with a
new one following the steps in Chapter 4, Replacement Procedures.
2-50
Satellite A20 Maintenance Manual (960-444)