Toshiba TECRA S1 Benutzerhandbuch

Seite von 268
3  Diagnostic Programs                                                                       3.11Error Codes and Description 
60 
TECRA S1Maintenance Manual 
 07 
Update-ended Interrupt 
Error 
R/W errors with the RTC 
refreshing interrupt controller. 
As above. 
 08 
RTC Alarm Error 
The PC speaker's sound source --
-counter/timer 8253 can not 
produce corresponding timing 
signal. 
As above. 
 12 
System Board Speaker 
Error 
The Speaker can not sound 
normally. 
Check the volume tuner. 
 13 
PCI Bus Error 
No PCI. 
Check the board. 
 14 
PCI Bus Scan Error 
PCI test fails. 
As above. 
 15 
PCI Device Access Error  PCI access fails. 
As above. 
 16 
PCI Config Verification 
Error 
Wrong PCI configuration. 
Check PCI configuration on main
board or PCI Device 
configuration. 
 17 
PCI to ISA Bridge Error  PCI-ISA bridge errors. 
Repeat multiple times. If there is 
always the same error, replace the 
board. 
 18 
ESCD Error 
ESCD errors. 
As above. 
 34 
Power Management 
functionality Test Fail 
Power management functionality 
test fails. 
Repeat multiple times. If there is 
always the same error, replace the 
board. 
 51 
No Find RSDP 
No RSDP is found. 
As above. 
 52 
Address Map Test Error  Errors with the Address Map test. As above. 
 53 
ACPI Table Test Error 
Errors with the ACPI table test.  As above. 
34xx  
FAN 
 
 
 
01  Fan Slow Speed Test Fail  The fan slow speed test fails. 
Check the FAN connection. 
 
02  Fan Stop Test Fail 
The fan stop test fails. 
As above. 
 
03  Fan Fast Speed Test Fail  The fan fast speed test fails. 
As above. 
04xx  
Video 
 
 
 
01  Text Attribute Error 
Physical problems with the video 
card. 
Check whether there is any 
physical problem with the video 
card. 
 
02  Text Page Selection Error As above. 
As above. 
 
03  Text Color Error 
As above. 
As above. 
 
04  Text Mode Error 
As above. 
As above.