Toshiba TECRA S1 Benutzerhandbuch
2 Troubleshooting
2.4 System Board
2-12
TECRA S1 Maintenance Manual
Procedure 2 Printer Port LED Check (in Boot Mode)
The printer port LED displays the POST status and error status by turning lights on and off as
an eight-digit binary value obtained in the boot mode after the system unit is switched on.
Figure 2-2 shows the printer port LED.
The printer port LED displays the POST status and error status by turning lights on and off as
an eight-digit binary value obtained in the boot mode after the system unit is switched on.
Figure 2-2 shows the printer port LED.
Figure 2-2
Printer port LED
Figure 2-3 illustrates how the printer port LED shows a status value.
Printer port LED status = 35H
Figure 2-3
Printer port LED board