Toshiba qosmio f10 Benutzerhandbuch

Select the option you want to execute and press Enter. When you select 1- SYSTEM TEST, 
the following message will appear: 

SYSTEM TEST NAME   XXXXXX  xxxxxxx DIAGNOSTIC TEST VX.XX 

[Ctrl]+[Break] ; test end 
[Ctrl]+[C]     ; 

key stop 

SUB-TEST   : XX 
PASS COUNT : XXXXX  

ERROR COUNT: XXXXX 

WRITE DATA : XX     

READ DATA  : XX 

ADDRESS    : XXXXXX 

 

STATUS     : XXX 

SUB-TEST MENU : 

01 - ROM checksum 
02 – Fan ON/OFF 
03 - Geyserville 
04 - Quick charge 
05 - DMI read 
99 - Exit to DIAGNOSTIC TEST MENU 

 

Select the desired subtest number from the subtest menu and press Enter. The following message 
will appear: 

TEST LOOP  : YES (or NO) 
ERROR STOP : YES (or NO) 

Use the right and left arrow keys to move the cursor to the desired option. 

Selecting YES of TEST LOOP increases the pass counter by one, each time the test cycle ends 
and restarts the test cycle.  

Selecting NO returns the process to the subtest menu after the test is complete. 

Use the up and down arrow keys to move the cursor to “ERROR STOP”. 

Use the right and left arrow keys to move the cursor to the desired option and press Enter.