Toshiba qosmio f10 Benutzerhandbuch
![Toshiba](https://files.manualsbrain.com/attachments/acaaaa9cc6b763ccfc72ced2ae95d9c94b8b8632/common/fit/150/50/8adbcbcd45c75dc53932fc9caf6f2740daed52d836b76efbd0162ac2599f/brand_logo.png)
4.9 SD board/MDC
4 Replacement Procedures
4-34
QOSMIO F10 Maintenance Manual (960-498)
4.9.2 MDC
Removing the MDC
The following describes the procedure for removing the MDC (See Figure 4-20).
1. Turn over the SD board.
2. Remove the following screws fixing the MDC and pull the MDC straight up from the
connector CN3000 on the SD board.
?
M2
?
4Z
BIND screw
x2
3. Remove the RJ11 harness from the MDC.
Figure 4-20 Removing the MDC
Installing the MDC
The following describes the procedure for installing an MDC (See Figure 4-20).
1. Connect the RJ11 harness to the MDC.
2. Connect the MDC to the connector CN3000 on the SD board.
3. Secure the MDC with the following screws .
?
M2
?
4Z
BIND screw
x2
MDC
M2
?
4Z BIND
RJ11 harness
CN3000