Toshiba qosmio f10 Benutzerhandbuch
4.13 RTC battery
4 Replacement Procedures
4-40
QOSMIO F10 Maintenance Manual (960-498)
4.13 RTC battery
Removing the RTC battery
The following describes the procedure for removing the RTC battery (See Figure 4-25).
1. Disconnect the RTC battery harness from the connector CN8490 on the system board.
2. Pull out the RTC battery harness from the guide and remove the RTC battery.
Figure 4-25
Removing the RTC battery
Installing the RTC battery
The following describes the procedure for installing the RTC battery (See Figure 4-25).
1. Install the RTC battery and pass the RTC battery harness through the guide .
2. Connect the RTC battery harness to the connector CN8490 on the system board.
RTC battery
Guide
RTC battery harness
CN8490