Toshiba S2 Benutzerhandbuch

2.9  TouchPad Troubleshooting 

To determine if the computer’s built- in speakers are functioning properly, perform the following 
procedures. Figure 2-10 outlines the process. First adjust the speaker volume to an appropriate 
level. Start with Procedure 1 and continue as instructed. 

Procedure 1:  Audio source test 

Procedure 2:  Earphone test 

Procedure 3:  Connection check 

Procedure 4:  Replacement check 

Try different audio sources (e.g. an audio CD and digital music file) to determine whether the 
fault is in the speaker system or not. If not all sources have sound problem, the problem is in the 
source devices. If all have the same problem, continue with Procedure 2. 

Connect a set if earphones or external speakers. If these function correctly, go to Procedure 3. If 
they do not function correctly, the system board may be defective or damaged. Replace it with a 
new one. 

Disassemble the computer following the steps described in Chapter 4, Replacement Procedures 
and make sure the speaker cable is firmly connected to the audio board. If the stereo speakers are 
still not functioning properly, go to Procedure 4. 

If the stereo speakers don't sound properly, the stereo speakers may be defective or damaged. 
Replace them with new ones. If the stereo speakers still do not work properly, try replacing in 
turn the audio board and system board.