Fujitsu 2000 Benutzerhandbuch
27
●
The PC does not turn on. The power lamp in the front face does not go on.
Check whether the power cable is connected to an outlet.
●
Data cannot be read from the CD-ROM drive.
Check the following:
- Check whether the CD-ROM disk is placed at the center of the tray.
- Check whether the CD-ROM disk is placed at the center of the tray.
Place the CD-ROM disk with the label side up.
- Ensure the CD-ROM disk is not upside down.
Place the CD-ROM disk with the label side up.
- Ensure the CD-ROM disk is clean and dry.
Clean the CD-ROM disk with dry soft cloth, wiping from the center to the outside.
- Ensure the CD-ROM disk is not damaged or extremely warped.
Replace the CD-ROM disk.
- Check whether the CD-ROM disk complies with the standard.
Use a CD-ROM disk that complies with the standard.
●
Characters input from the keyboard are not displayed. While an application is
running, no Windows 98 applications respond.
Check whether the keyboard is correctly connected.
Check whether the keyboard is correctly connected.
●
The mouse cursor does not move.
Check whether the mouse is correctly connected.
■
Trouble information concerning Windows 98
●
While an application is running, no Windows 98 applications respond.
Press [Ctrl]+[Alt]+[Delete] to terminate the application. If the application does not terminate,
press [Ctrl]+[Alt]+[Delete] twice to reactivate the PC. If the PC is not reactivated, press the
reset switch. When the PC is reactivated, choose the "Start" menu, "Programs", "Accessories",
and "System Tools" in that order. Click on "ScanDisk".
If no error is found in ScanDisk, use the PC as it is. If an error is found, fix the error, following
messages. Another trouble may occur after the error is fixed. If the PC suffers from frequent
problems, re-install Windows 98 and applications.
press [Ctrl]+[Alt]+[Delete] twice to reactivate the PC. If the PC is not reactivated, press the
reset switch. When the PC is reactivated, choose the "Start" menu, "Programs", "Accessories",
and "System Tools" in that order. Click on "ScanDisk".
If no error is found in ScanDisk, use the PC as it is. If an error is found, fix the error, following
messages. Another trouble may occur after the error is fixed. If the PC suffers from frequent
problems, re-install Windows 98 and applications.
Note the following
When an application is terminated by pressing [Ctrl]+[Alt]+[Delete] or when the PC is reset, the
contents of the work on the application are not stored.
contents of the work on the application are not stored.
●
The mouse is disabled, and Windows 98 cannot be terminated.
Windows 98 can be terminated by these key strokes:
Windows 98 can be terminated by these key strokes:
1
Press the Windows key or [Ctrl]+[Esc].
The "Start" menu appears.
The "Start" menu appears.
2
Press the [
↑
] or [
↓
] key to choose "Shut Down", then press the [Enter] key.
The "Shut Down Windows" dialog box appears.
3
Choose "Shut down the computer?", then press the [Enter] key.
Windows 98 terminates.
Windows 98 terminates.
06Carrol(25-28)
17/06/2000, 13:49
27