Gateway 9210 Benutzerhandbuch

www.gateway.com

Your server’s standard configuration includes one CD drive, a 3.25 inch diskette drive, and 
one SATA hard drive. Your server also has one additional 5.25-inch external drive bay, one 
additional 3.5-inch external drive bay, and two additional internal drive bays.

As you prepare to install drives, remember:

■

Before you install a drive, see the drive’s documentation for information on 
configuring the drive, setting drive jumpers, and attaching cables.

■

You may need to configure the drives you install using the BIOS Setup utility. Press 
F2 at startup to open the BIOS Setup utility.

■

Parallel ATA (PATA) hard drives, also known as IDE hard drives, can be configured as 
single, master, slave, or cable-select. IDE CD drives can be configured as master, slave, 
or cable-select.

■

If cable-select is available (drive assignments will be marked on the cable), the PATA 
cable assigns the master/slave positions to the drives it connects. You can override 
these assignments using the jumpers on the drives.

■

If cable-select is not available and only one drive is attached to a PATA controller 
cable, configure the drive as master if it is a CD drive. If two drives of any type 
are attached to the cable, configure one as master and one as slave.

5.25-inch drive bay

3.5-inch drive bay

CD drive

3.5-inch diskette drive