Gateway 9210 Benutzerhandbuch
51
www.gateway.com
Replacing the system board
To replace the system board:
1
Print the appendix for
.
2
Restart your server, then press F2 when the Gateway logo screen appears during
startup.
startup.
3
Record any custom BIOS settings on your printout, then close the BIOS utility.
4
Follow the instructions in
.
5
Follow the instructions in
.
6
Remove the memory modules. For instructions, see
7
Remove the PCI expansion cards. For instructions, see
.
8
Remove the heat sink and processor. For instructions, see
9
Disconnect the power and data cables from the system board, noting their locations
and orientation. (You will reconnect the cables after you install the new board.) Make
sure that you disconnect the intrusion switch cable.
and orientation. (You will reconnect the cables after you install the new board.) Make
sure that you disconnect the intrusion switch cable.
Thumbscrew
Intrusion switch connector