Gateway E-6100 Benutzerhandbuch
102
Chapter 7: Upgrading Your Computer
www.gateway.com
6
Slide the new drive in, then slide the release lever toward the inside of the
case.
case.
7
If you are replacing a drive, reconnect the drive cables using your notes
from
from
. The red-striped edge of the data ribbon cable indicates Pin 1
and corresponds with Pin 1 on the drive (typically on the side farthest from
the power supply connection). See the drive documentation for more
information.
the power supply connection). See the drive documentation for more
information.
- OR -
If you are adding a drive, connect the drive cables. See the drive
documentation for more information.
documentation for more information.
8
Close the case using the instructions in
.